Silbrico

Silbrico
  Silbrico
When using Silbrico SIL-KLEER filter aid in place of other products, different operating procedures may be required. Silbrico SIL-KLEER should be used on a volumetric basis, (i.e.: bag for bag), because Silbrico SIL-KLEER is considerabley lighter than most other filter aid products. Actual operating procedures, grades and quantities can best be determined by testing.


TYPICAL FILTRATION AND PHYSICAL CHARACTERISTICS OF SIL-KLEER

GRADE
WEIGHT OF BAGS (LBS.)
CAKE PERMEABILITY (IN DARCIES)
RELATIVE FLOW (ml)
AVERAGE WET CAKE (LBS/CU.FT.)
Sil-Kleer #27-M
40
.2
300
12.5
Sil-Kleer #25-M
32
.5
550
10.0
Sil-Kleer #23-S
34
1.0
750
9.0
Sil-Kleer #21-S
32
1.5
950
8.5
Sil-Kleer #19-S
29
2.0
1100
8.0
Sil-Kleer #17-S
25
3.0
1300
7.0
Sil-Kleer #15-S
23
5.0
1700
6.0
(Tested with tap water under constant pressure.)


TYPICAL CHEMICAL ANALYSIS
Silicon Dioxide.................. 73.8 %
Aluminum Oxide................ 13.9 %
Potassium Oxide................. 4.3 %
Sodium Oxide..................... 4.7 %
Iron Oxide......................... 0.9 %
Calcium Oxide.................... 0.9 %
Magnesium Oxide................ 0.3 %
Traces............................. 0.2 %
   Percent Moisture
    at 105C for 4 hrs...............<1.0
100.0
TRACE ELEMENTS
 Arsenic................ <0.001 %*
 Barium...................... <0.1 %
 Boron...................... <0.01 %
 Chlorine............... <0.0005 %
 Chromium............. <0.0075 %
 Copper................. <0.0015 %
 Gallium.................... <0.05 %
 Lead................... <0.001* %
 Manganese............... <0.3 %
 Molybdenum........... <0.002 %
 Nickel.................... <0.002 %
 Sulfer....................... <0.2 %
 Titanium................... <0.1 %
 Zirconium............... <0.003 %

* By Food Chemical Codex Method
Technical data shown is considered accurate and reliable. However, there is no guarantee of results, and no formulation gives permission to violate any patent.